3D Printer BuildTak for STACKER 500

We are proud to offer our custom sized BuildTak™ print bed surface. The thin sheet of special plastic quickly and easily attaches to your STACKER’s glass or aluminum bed.  BuildTak™ makes almost every print stick better than any other method. To remove the prints you will need to use a sharpened scraper or the BuildTak™ Spatula to pry off your parts.

This sheet of BuildTak™ is custom sized to fit the STACKER 500 glass build plate and can be trimmed to fit our aluminum bed.

$29.99

In stock

STACKER’s custom BuildTak™ sheet fits perfectly on our Stacker 500 glass bed, or it can be trimmed to fit the aluminum bed upgrade.  Stacker 500 BuildTak™ sheet measures 19-5/8” x 11-9/16”.

To remove parts, use sharpened paint scraper or the BuildTak™ Spatula. Reducing bed temperatures before attempting to remove parts can also be very helpful.

BuildTak Works with all I-BEAM Filaments.  BuildTak also works with ABS, PLA, PC, PLA-composits such as (WoodFill, CorkFill, CopperFill, BronzeFill, and SteelFill), HIPS, PET+, and all of ColorFabb’s line including XT, HT, nGen, and nGen Flex.  We have had success with colorFabb’s PA-CF and PA-NEAT on BuildTak.  We have also had good results with TPUs even though the BuildTak website warns that TPU filaments typically fuse with the BuildTak surface.

Do NOT use glue or other adhesives on BuildTak.  Never clean BuildTak with acetone.  Only clean BuildTak with a clean cloth and rubbing alcohol.

Please visit the BuildTak™ Support Page for an instructional video and FAQ.