STACKER 3D printer nozzles are available in both mid temp and high temp versions. Our one-piece stainless steel designed provides long wear life and leak-proof performance.
Mid Temp Nozzles: Ideal for most print jobs and filaments. Mid temp nozzles are designed for temperatures up to 275°C, but these nozzles will work fine with higher temperatures.
High Temp Nozzles: These are designed for special high temp applications and filament extruded between 280°C to 300°C.
STACKER nozzles are available in a wide variety of sizes (orifice diameter) including 0.25mm, 0.40mm, 0.50mm, 0.60mm, 0.80mm, and 1.00mm.
Use fine tipped nozzles (smaller orifice diameter) for smaller layer heights and larger nozzle sizes (larger orifice diameter) for thicker layer heights. For example, an 0.40mm nozzle works great at 0.1 to 0.3mm layer height, where as 0.80mm nozzle will work with layer heights from 0.50mm to 0.70mm. Keep in mind, larger nozzle sizes allow you to finish prints much faster than smaller nozzle sizes because larger nozzles can extrude more filament more quickly. We encourage you to experiment with different nozzles sizes – it’s fun and the results may surprise you.
STACKER nozzles only work with 1.75mm diameter filament; Stacker nozzles will not work on 2.85mm diameter filament.
STACKER nozzles can be swapped out in minutes so you can quickly and easily match the nozzle to your specific printing needs – no more compromises. When changing nozzles, be sure to follow the nozzle installation process exactly to avoid filament jams.